Coretools ISO / TS 16949

| About Us | Sitemap | Contact Us |

*** CoreTools ISO TS 16949 , Pocket Handbook Safety Management System ***

Coretools ISO / TS 16949

Advanced Product Quality Planning (APQP)
This book explains how mass-production process success by producing a low reject rate and high
efficiency that is strongly influenced by new product development process (APQP). In other words,
the mass-production process is good or bad is a result of new product development process (APQP).

Author : Chrysler LLC, Ford and General Motors.
Publisher : Automotive Industry Action Group.
Year published : Second Edition, July 2008.
Number of Pages : 116 pages.
Price : Rp. 1.062.500,-

Production Part Approval Proses (PPAP)
With the implementation system of just in time (JIT) in the automotive industry, car assembly
companies have little stock of components / parts, and it would require the support of suppliers who
are able to send products without reject. However, frequent deliveries of samples from supplier results are good,but a lot of trouble delivering the mass product. Hence the new product approval system and then changed from sample approval system into a system

Author : Chrysler LLC, Ford and General Motors.
Publisher : Automotive Industry Action Group.
Year published : Fourth Edition, march 2006, 2nd Printing, November 2009.
Number of Pages : 71 pages.
Price : Rp. Rp. 1.062.500,-

Failure Mode and Effects Analysis (FMEA)
FMEA is an engineering technique used to define, identify, and eliminate the failures that are known and / or potential failures, problems, errors, the system / design / process / service prior to such failure to the customer's hand. When do we use FMEA? FMEA is a preventive tool, therefore FMEA must be use prior to manufacture or before production, tooling begins. Recommended corrective actions from the FMEA, should be completed prior to mass production are made.

Author : Chrysler LLC, Ford and General Motors.
Publisher : AIAG.
Year published : Fourth Edition, June 2008.
Number of Pages : 148 pages.
Price : Rp. 1.300.000,-

Measurement Systems Analysis (MSA)
Why do we need to do a MSA study? We took the decision whether a product is good or not based on the measurement results. When the measurement results stated object length 20.1 mm, then we believe that the true length of the object is 20.1 mm. Do we believe that the results of our measurements are 100% correct or accurate? Could the results of measurement 20.1 mm, but the actual object size is 20.2 mm? Therefore, we need to do a study of the measurement system (MSA) to ensure that the measurement system that we use always gives the correct result every time we use.

Author : Chrysler LLC, Ford and General Motors.
Publisher : Automotive Industry Action Group.
Year published : Fourth Edition, June 2010.
Number of Pages : 241 pages.
Price : Rp. Rp. 1.062.500,-

Statistical Process Control (SPC)
In a production process control, understanding the concept of variation will be very important among others in terms of quality. Without understanding the concept of variation, it is probable that there are errors in the decision that would ultimately result in the delivery of project to the customer or to the next process. Statistical Process Control (SPC) functions studied the variation of a production process.

Author : Chrysler LLC, Ford and General Motors.
Publisher : Automotive Industry Action Group.
Year published : Second Edition, July 2005, second printing March 2005.
Number of Pages : 229 pages.
Price : Rp. 937.500,-

IATF Guidance To ISO/TS 16949 : 2002
This book is a guide for the automotive industry to the requirements specified in ISO / TS 16949:2002. IATF guidance contains examples, applications, practices, or explanation that supports the ISO / TS 16949:2002, which can be apply in companies where production is set according to customer requirements.

Author : International Automotive Task Force (IATF).
Publisher : Automotive Industry Action Group.
Year published : Third Edition, 1 October 2008.
Number of Pages : 48 pages.
Price : Rp. Rp. 1.062.500,-

Quality Management System To ISO/TS 16949 : 2002
ISO / TS 16949:2009 (formerly known as ISO / TS 16949:2002) is a worldwide automotive standard developed by International Automotive Task Force (IATF). ISO / TS 16949:2009, in conjunction with ISO 9001:2008, defines the quality management system requirements for the design and development, production and, when relevant, installation and services related to automotive products.

Author : Chrysler LLC, Ford and General Motors.
Publisher : AIAG.
Year published : Third Edition, June 2009.
Number of Pages : 52 pages.
Price : Rp. Rp. 1.062.500,-

Automotive Certification Scheme Rules 3rd
...

Price : Rp. Rp. 1.062.500,- BOOK DETAIL

Pocket Books ISO / TS 16949
This book is concise and clear, to understand the requirements of ISO TS 16949 & ISO TS Coretools like (PPAP, APQP, FMEA, SPC, MSA). Not enough to just find out what the required by ISO / TS 16949, but we need to understand the concept of & intent of these requirements.

Author : Sentral Sistem Consulting Team.
Publisher : Sentral Sistem Consulting.
Thick book : 48 pages.
Price : Rp.10.000,-

Environmental Management System Handbook
This book is concise, clear, easily understood handbook, and explained how to increase awareness of Environmental Concern (Environmental Awareness); Development and Implementation of Environmental Management System based on ISO 14001:2004, Environmental Management System Requirements and Usage Guidelines and the attachment of: The relationship between ISO 14001: 2004 and ISO 9001:2008.

Author : Sentral Sistem Consulting Team.
Publisher : Sentral Sistem Consulting.
Price : Rp.15.000,-

Pocket Handbook of Safety Management System
Our hope, Safety Pocket Handbook could be useful, giving EDUCATION in increasing public awareness to cultivate SAFETY AND HEALTH AT WORK AT ANY TIME and ANYWHERE, not only industrial society, but society in general, to achieve: Vision "Culture K3 Indonesia Year 2015".

Author : Sentral Sistem Consulting Team.
Publisher : Sentral Sistem Consulting.
Price : Rp.25.000,-

Transforming Organization
Still could not transform your company do the transformation? In a very rapid development of the age, the changes around us demanding breakthroughs in all fields, from the structure, systems, up to the strategy. In other words, the success lies on the shoulders of a company that quickly respond to the demands of this

Author : Sentral Sistem Consulting Team.
Publisher : Sentral Sistem Consulting.
Price : Rp.80.000,-

Back

** Harga Sewaktu-waktu dapat berubah

IMPROVEMENT
Related to it's title, this is the best solution for company who wants to boost their performance. Get ready to take a big leap with us, together we will cut your customer claim, reduce internal reject, and find way how you can save your expenses through efficiency.

Read

CONSULTATION
Provide a Performance Based Management Consultation.
We emphasize the consultation on increasing the Value of our clients by delivering the best practice in each type of business.

Read

AUDIT
Our consultation audit services emphasize on increasing the effectiveness of recent system.
The focus is not only on verification the compliance to management system requirements (ISO 9001, 14001, OHSAS 18001, etc), but also to find opportunities to increase the company performance).

Read

TRAINING
With years of experience, our valued clients respect us as training provider with applicative method and easy to understand. For us, client's satisfaction is placed as a top priority and we ensure you, after attending our training session, you will understand and know how to implement it in your company .

Read